Car wrap is a great way to protect your vehicle’s paint from scratches, fading, and other damages. However, there comes a time when you may want to remove it. Maybe you want to sell your car, or you simply want to change the design. Whatever the reason, removing car wrap can be a daunting task. In this article, we’ll walk you through the process step-by-step, so you can remove your car wrap safely and effectively.
What You’ll Need
Before you start, make sure you have the following tools:
- Heat gun or hair dryer
- Plastic scraper
- Goo Gone or other adhesive remover
- Microfiber towels
- Soap and water
Step-by-Step Guide to Remove Car Wrap
Follow these steps to remove car wrap from your vehicle:
Step 1: Heat the Wrap
Use a heat gun or hair dryer to heat up the car wrap. This will soften the adhesive and make it easier to remove. Hold the heat gun about six inches away from the wrap and move it in a circular motion. Be careful not to overheat the wrap, as this can damage the paint underneath.
Step 2: Peel Off the Wrap
Once the wrap is heated, use a plastic scraper to lift the edge of the wrap. Slowly peel the wrap off the car, pulling it at a 45-degree angle. If the wrap is stubborn, use the heat gun to soften it further. Be patient and take your time to avoid damaging the paint underneath.
Step 3: Remove Adhesive Residue
After the wrap is removed, you may notice some adhesive residue left on the car. Use Goo Gone or another adhesive remover to dissolve the adhesive. Apply the adhesive remover to a microfiber towel and rub it onto the residue. Let it sit for a few minutes, then wipe it off with a clean towel.
Step 4: Clean the Surface
Once all the adhesive is removed, clean the surface with soap and water. This will remove any remaining residue and ensure the surface is clean and ready for a new wrap or paint job.
Tips for Removing Car Wrap
Here are some tips to make the car wrap removal process easier:
- Work in a shaded area to avoid overheating the wrap or damaging the paint.
- Use a plastic scraper instead of a metal one to avoid scratching the surface.
- Use a microfiber towel to avoid leaving any scratches or marks on the surface.
- Wear gloves to protect your hands from the adhesive remover.
- If you’re having trouble removing the wrap, apply more heat or adhesive remover.
Removing car wrap may seem like a daunting task, but with the right tools and techniques, it can be done safely and effectively. Follow these steps and tips to remove your car wrap without damaging the paint, and you’ll be ready for a new design or paint job in no time.